Jury Strut Attach Point

Here is the drawing for the jury strut attach point.

Jury-strut-attach-point-0
The lift strut is drilled to accept a 3/8″ OD tube that has one end flattened to provide a tab for the jury strut attach.  The tube is welded on both sides of the lift strut and acts as a stiffener.

Here are several photos of an original list strut cut at the jury strut attach point.

jury-strut-attach-point-1jury-strut-attach-point-2jury-strut-attach-point-3

Leave a Reply

Your email address will not be published. Required fields are marked *